When you check the server, you can see that the router configuration file is saved as R1_Config. In the following image, you can see that the configuration of the Router has been successfully backed up! R1#copy running-config tftp:Īddress or name of remote host ? 192.168.8.5ĭestination filename ? R1_Configĩ74 bytes copied in 4.444 secs (219 bytes/sec) In the Remote Host section, do not forget to enter the IP address of the TFTP server! Now execute the following commands at the CLI command prompt to back up the running-config file on the router. Then start the service from the File menu.
#Copy startup config to tftp server install#
Ping the Windows 10 machine from the router CLI console to test the network connection.Īfter verifying the network connection, install and run the SolarWinds TFTP Server program on the Windows 10 VM. Ping the test from the VMware Windows 10 virtual machine to the Router’s FastEthernet0/0 interface. In addition, create a new user and configure the Console connection to connect to your Router from a remote computer. Once you have completed the VMware Workstation settings, run GNS3 and create the topology as shown in the following illustration. Create a new virtual machine with VMware, and then configure the VMnet settings as shown in the image below.Īfter creating VMnet3, change the IP address to 192.168.8.2.Īfter completing the VMware Workstation settings, run GNS3 and create the topology as shown in the image below.
0 kommentar(er)
